CONSUMPTION MEASURING SYSTEM
FUEL>TEC is a measuring systems, Mass flow, density and temperature are acquired by a high-accuracy Coriolis sensor and measured and evaluated by the integrated electronics
Application
- The FUEL>TEC measuring and conditioning system is used in stationary engine and roller test benches
- The system is designed for continuous, accurate measurement of fuel consumption. The true mass of the fuel consumed is measured using the Coriolis measurement principle
- In addition the device conditions the fuel supplied to the engine in terms of temperature and pressure
Benefits
- FUEL>TEC provides for highly accurate measurement of the fuel flow with a view to determining fuel consumption
- Continuous measurement of the fuel mass by the FUEL>TEC system will provide you with the information required for optimizing the combustion process and hence fuel consumption
- The FUEL>TEC 1770/xxx model is suitable for use with advanced, liquid alternative fuels (in addition to all common conventional fuel types), which will mean that you are able to meet future requirements
- Except for the periodic replacement of the fuel filter, the system is completely maintenance- free, saving time and cost
- FUEL>TEC is factory-calibrated and therefore immediately ready for use without any further preparation
| 1760/1770/xx | /50 (H) | /250 (H) | /500 (H) |
|---|---|---|---|
| Mass flow | 0-50kg | 0-250kg | 0-500kg |
| Engine power - Petrol engines | up to approx. 180kW | up to approx. 850kW | up to approx. 1700kW |
| Engine power - Diesel engines | up to approx. 200kW | up to approx. 1000kW | up to approx. 2000kW |
| Measuring tolerance | 0,1% of reading * see Measuring tolerance | ||
| Reproducibility | 0,05% of reading | ||
| Media | Gasoline and Diesel fuel | ||
| Media for Multifuel 17701770 | Biodiesel (RME), jet fuel, ethanol, methanol up to 100% | ||
| Kinematic viscosity of medium | 0,5-6cSt | ||
| Fuel temperature | 12°C-70°C | ||
| Fuel supply pressure | 0-3 bar | ||
| Fuel Inlet and return pressure | 0,05 bar -0,8 bar | ||
| Density measuring unit | Measuring range 0,1-2,9g/cm<sup>3</sup>; measuring error 0,006g/cm<sup>3</sup>; reproducibility 0,001 g/cm<sup>3</sup> | ||
| Cabinet dimensions (WxHxD) | 1150mm x 1500mm x 300mm | ||
Automotive Testing Expo 2012
TECHNOGERMA SYSTEMS will again be presenting itself in Stuttgart, this time with a new stand design and an enlarged stand area. more
TECHNOGERMA enters partnership with the Hessen State Government
Upon the invitation of the Hessen State Government the test facility specialist joins the network of “Electro Mobility“ in Hessen as a partner. more
Volkswagen Group Employs TECHNOGERMA Test Beds
The test bed specialist, TECHNOGERMA in Darmstadt, receives the assignment to plan and construct a full test field in container-type construction for the Volkswagen subsidiary, Autovision GmbH. more
